Chords for Filthy Punk Double Stop Unison Bends
Tempo:
97.7 bpm
Chords used:
A
E
G
F
C
Tuning:Standard Tuning (EADGBE)Capo:+0fret
Start Jamming...
[A]
[G] [F]
[E] [A]
[C] [F]
[Am]
[N]
Ok, so what is a unison bend?
Well basically it's two notes played at the same time.
One
of them is [E] going to bend up to the pitch of the other one.
For example, if we play an
E note on the second string at fret 5, D note fret 7 and bend that up a full step, we get
unison.
The bent pitch is actually E, [F#] same [E] as that.
Which is pretty cool.
Ok, so as far as what the lesson is going to involve, I'm just going to show you what
I was doing in the intro pretty much.
So we start with the unison bend at the position
we just did, which is the 5th position.
And what we're going to do here also is actually
add in the double stop.
So we need to bar the finger at the 5th over the 1st in the
second string.
And we're basically going to do the unison [A] bend and then hit the double
stop a couple of times.
Repeat this about 4 times and then finish off in the second
bar with one extra double stop.
So it should sound like this.
Ok, what about the strumming of it?
Weirdly enough I can't remember, but I was probably
using just like an alternate strumming technique.
So we just go down, up, down, up the whole
time.
There is a bit of an accent on the unison bend though.
Let's take a look at that.
So it's [Gm] sort of like a
Now the other way you could do it is by using like a [A] down, up, [G] down, then [A] repeat that.
On
the last 4 strums, every second bar though, you'd want to go down, up, down, up because
there's that extra double stop.
So for the majority of this I'm basically just moving
that idea around.
A couple of instances where I use just a unison bend between a [E] couple of strings.
[A] Here's the whole lot.
[G] [Fm]
[Em] [A]
[C]
[F]
[E] [Am]
[N]
[G] [F]
[E] [A]
[C] [F]
[Am]
[N]
Ok, so what is a unison bend?
Well basically it's two notes played at the same time.
One
of them is [E] going to bend up to the pitch of the other one.
For example, if we play an
E note on the second string at fret 5, D note fret 7 and bend that up a full step, we get
unison.
The bent pitch is actually E, [F#] same [E] as that.
Which is pretty cool.
Ok, so as far as what the lesson is going to involve, I'm just going to show you what
I was doing in the intro pretty much.
So we start with the unison bend at the position
we just did, which is the 5th position.
And what we're going to do here also is actually
add in the double stop.
So we need to bar the finger at the 5th over the 1st in the
second string.
And we're basically going to do the unison [A] bend and then hit the double
stop a couple of times.
Repeat this about 4 times and then finish off in the second
bar with one extra double stop.
So it should sound like this.
Ok, what about the strumming of it?
Weirdly enough I can't remember, but I was probably
using just like an alternate strumming technique.
So we just go down, up, down, up the whole
time.
There is a bit of an accent on the unison bend though.
Let's take a look at that.
So it's [Gm] sort of like a
Now the other way you could do it is by using like a [A] down, up, [G] down, then [A] repeat that.
On
the last 4 strums, every second bar though, you'd want to go down, up, down, up because
there's that extra double stop.
So for the majority of this I'm basically just moving
that idea around.
A couple of instances where I use just a unison bend between a [E] couple of strings.
[A] Here's the whole lot.
[G] [Fm]
[Em] [A]
[C]
[F]
[E] [Am]
[N]
Key:
A
E
G
F
C
A
E
G
_ _ _ _ _ _ _ [A] _
_ _ _ [G] _ _ _ _ [F] _
_ _ _ [E] _ _ _ _ [A] _
_ _ _ [C] _ _ _ _ [F] _
_ _ _ _ _ _ [Am] _ _
_ _ _ _ _ [N] _ _ _
Ok, so what is a unison bend?
Well basically it's two notes played at the same time.
One
of them is [E] going to bend up to the pitch of the other one.
For example, if we play an
E note on the second string at fret 5, D note fret 7 and bend that up a full step, _ we _ _ _ _ _ get
unison.
The bent pitch is actually E, _ [F#] same [E] as that. _ _ _
_ _ _ _ _ Which is pretty cool.
Ok, so as far as what the lesson is going to involve, I'm just going to show you what
I was doing in the intro pretty much.
So we start with the unison bend at the position
we just did, which is the 5th position.
And what we're going to do here also is actually
add in the double stop.
So we need to bar the finger at the 5th over the 1st in the
second string.
And we're basically going to do the unison [A] bend _ and then hit the double
stop a couple of times.
Repeat this about 4 times and then finish off in the second
bar with one extra double stop.
So it should sound like this. _ _ _ _ _
_ _ _ _ _ _ _ _
_ _ _ _ Ok, what about the strumming of it?
Weirdly enough I can't remember, but I was probably
using just like an alternate strumming technique.
So we just go down, up, down, up the whole
time.
There is a bit of an accent on the unison bend though.
Let's take a look at that. _ _ _ _ _
_ So it's [Gm] sort of like _ _ _ _ a_
Now the other way you could do it is by using like a [A] down, up, [G] down, then [A] repeat that. _ _ _ _ _ _ _
On
the last 4 strums, every second bar though, you'd want to go down, up, down, up because
there's that extra double stop.
So for the majority of this I'm basically just moving
that idea around.
A couple of instances where I use just a unison bend between a [E] couple of strings.
_ _ [A] Here's the whole lot. _ _ _
_ [G] _ _ _ _ _ [Fm] _ _
_ _ _ [Em] _ [A] _ _ _ _
_ _ _ _ _ _ [C] _ _
_ _ _ [F] _ _ _ _ _
_ _ _ _ _ [E] _ [Am] _ _
[N] _ _ _ _ _ _ _ _
_ _ _ [G] _ _ _ _ [F] _
_ _ _ [E] _ _ _ _ [A] _
_ _ _ [C] _ _ _ _ [F] _
_ _ _ _ _ _ [Am] _ _
_ _ _ _ _ [N] _ _ _
Ok, so what is a unison bend?
Well basically it's two notes played at the same time.
One
of them is [E] going to bend up to the pitch of the other one.
For example, if we play an
E note on the second string at fret 5, D note fret 7 and bend that up a full step, _ we _ _ _ _ _ get
unison.
The bent pitch is actually E, _ [F#] same [E] as that. _ _ _
_ _ _ _ _ Which is pretty cool.
Ok, so as far as what the lesson is going to involve, I'm just going to show you what
I was doing in the intro pretty much.
So we start with the unison bend at the position
we just did, which is the 5th position.
And what we're going to do here also is actually
add in the double stop.
So we need to bar the finger at the 5th over the 1st in the
second string.
And we're basically going to do the unison [A] bend _ and then hit the double
stop a couple of times.
Repeat this about 4 times and then finish off in the second
bar with one extra double stop.
So it should sound like this. _ _ _ _ _
_ _ _ _ _ _ _ _
_ _ _ _ Ok, what about the strumming of it?
Weirdly enough I can't remember, but I was probably
using just like an alternate strumming technique.
So we just go down, up, down, up the whole
time.
There is a bit of an accent on the unison bend though.
Let's take a look at that. _ _ _ _ _
_ So it's [Gm] sort of like _ _ _ _ a_
Now the other way you could do it is by using like a [A] down, up, [G] down, then [A] repeat that. _ _ _ _ _ _ _
On
the last 4 strums, every second bar though, you'd want to go down, up, down, up because
there's that extra double stop.
So for the majority of this I'm basically just moving
that idea around.
A couple of instances where I use just a unison bend between a [E] couple of strings.
_ _ [A] Here's the whole lot. _ _ _
_ [G] _ _ _ _ _ [Fm] _ _
_ _ _ [Em] _ [A] _ _ _ _
_ _ _ _ _ _ [C] _ _
_ _ _ [F] _ _ _ _ _
_ _ _ _ _ [E] _ [Am] _ _
[N] _ _ _ _ _ _ _ _