Chords for Tosca oversize bass chimes bass tubular bells

_ _ _ _ _ _ _ _
_ _ _ _ _ Okay, here I am up a ladder with two _ oversized base tubular bells.
These are 3 inch diameter, they're made from aluminium.
_ _ _ I'm up at the top of the workshop here, about as close to the ceiling as I can get
so that this low F will actually hang here.
We've got an F and a B flat.
These are for Tosca by Puccini, some of the low bells in that. _
I've got a wooden mallet here, relatively heavy,
a little heavier than a standard rawhide you'd use on a smaller set of tubular bells.
One face is normal hardwood, the other face is softened a little bit with a bit of leather.
_ _ Let's hear how they sound. _
_ _ _ _ _ _ [A#m] _ _
_ _ [C#] _ _ _ _ _ _
_ _ _ _ _ _ [G#] _ _
_ _ _ _ _ _ _ [A#m] _
_ _ _ _ _ _ [C#] _ _
_ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _
[G] _ That was with the softer face.
I'm going to get them a little brighter with the wooden face. _ _
_ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _
_ If we just swap around here. _
This is a Thor, what is it, Thor X712.
[F#] _
Fairly heavy metal mallet with nylon faces on it.
This gives a softer, warmer sound on these particular bells. _ _ _
_ _ _ _ _ _ _ [C#] _
_ _ _ _ _ _ _ _
_ _ [G#] _ _ _ _ _ _
_ _ _ [C#] _ _ _ _ _
_ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _
_ _ [B] _ _ Thank you for listening. _
_ _ _ _ _ _ _ _